mr-library/bsp/st/README_EN.md

ST configuration tutorial

中文

Note:

• This BSP only supports the HAL library, and does not currently support standard library(WCH driver can be used, you can configure yourself) or LL library requirements.
• This BSP needs to be used together with CubeMx.

Create project

Use CubeMx to create a project for the corresponding chip. Enable the required functions(Configure pin mapping, etc).

Note: Do not enable interrupts, otherwise it will report redefinition errors (the MR framework has taken over interrupts).

Import project into project (2. Add driver)

Copy bsp/st/driver and stm32xxx/driver files to driver.

Port driver

Refer to the stm32xxx/driver path Kconfig and mr_board.h in the previous step to modify parameters and complete the migration and tailoring(Note that the BSP is ported to the highest model in the same series, When selecting and using peripherals, please refer to the chip manual to check whether the current chip has additional devices).

Continue to add mr-library by pressing README in the repository directory