63be190d8b
-added support for bringing up the clocks and setting up the gpio bits before starting the uart. -add a proper target init routine -add scripts to flash board via openocd -fixed bug in riscv interrupt save state where it wasn't saving mstatus on irq entry. -comment out cycle enabling, not implemented on this core
LK
The LK embedded kernel. An SMP-aware kernel designed for small systems.
See https://github.com/littlekernel/lk for the latest version.
See https://github.com/littlekernel/lk/wiki for documentation.
Builds
To build and test for ARM on linux
- install or build qemu. v2.4 and above is recommended.
- install gcc for embedded arm (see note 1)
- run scripts/do-qemuarm (from the lk directory)
- you should see 'welcome to lk/MP'
This will get you a interactive prompt into LK which is running in qemu arm machine 'virt' emulation. type 'help' for commands.
note 1: for ubuntu: sudo apt-get install gcc-arm-none-eabi or fetch a prebuilt toolchain from http://newos.org/toolchains/arm-eabi-5.3.0-Linux-x86_64.tar.xz