406f28a3ea
The build was momentarily broken until this was added to fix it. Also generally remove a few extraneous defines in the platform code.
83 lines
2.8 KiB
Makefile
83 lines
2.8 KiB
Makefile
LOCAL_DIR := $(GET_LOCAL_DIR)
|
|
|
|
MODULE := $(LOCAL_DIR)
|
|
|
|
# ROMBASE, MEMBASE, and MEMSIZE are required for the linker script
|
|
ROMBASE := 0x10000000
|
|
MEMBASE := 0x20000000
|
|
MEMSIZE := 0x00042000
|
|
# can be overridden by target
|
|
|
|
ARCH := arm
|
|
ARM_CPU := cortex-m0plus
|
|
|
|
GLOBAL_DEFINES += \
|
|
MEMSIZE=$(MEMSIZE) \
|
|
ARM_CM_SET_VTOR=1 \
|
|
PICO_NO_HARDWARE=0 \
|
|
PICO_ON_DEVICE=1 \
|
|
PICO_NO_FPGA_CHECK=1 \
|
|
PICO_NO_BINARY_INFO=1
|
|
|
|
MODULE_SRCS += \
|
|
$(LOCAL_DIR)/debug.c \
|
|
$(LOCAL_DIR)/gpio.c \
|
|
$(LOCAL_DIR)/init.c \
|
|
$(LOCAL_DIR)/uart.c \
|
|
$(LOCAL_DIR)/vectab.c
|
|
|
|
MODULE_SRCS += \
|
|
external/platform/pico/rp2_common/hardware_claim/claim.c \
|
|
external/platform/pico/rp2_common/hardware_clocks/clocks.c \
|
|
external/platform/pico/rp2_common/hardware_gpio/gpio.c \
|
|
external/platform/pico/rp2_common/hardware_pll/pll.c \
|
|
external/platform/pico/rp2_common/hardware_timer/timer.c \
|
|
external/platform/pico/rp2_common/hardware_uart/uart.c \
|
|
external/platform/pico/rp2_common/hardware_watchdog/watchdog.c \
|
|
external/platform/pico/rp2_common/hardware_xosc/xosc.c
|
|
|
|
GLOBAL_INCLUDES += \
|
|
external/platform/pico/common/pico_base/include \
|
|
external/platform/pico/common/pico_binary_info/include \
|
|
external/platform/pico/rp2040/hardware_regs/include \
|
|
external/platform/pico/rp2040/hardware_structs/include \
|
|
external/platform/pico/rp2_common/pico_platform/include \
|
|
external/platform/pico/rp2_common/hardware_base/include \
|
|
external/platform/pico/rp2_common/hardware_claim/include \
|
|
external/platform/pico/rp2_common/hardware_clocks/include \
|
|
external/platform/pico/rp2_common/hardware_gpio/include \
|
|
external/platform/pico/rp2_common/hardware_irq/include \
|
|
external/platform/pico/rp2_common/hardware_pll/include \
|
|
external/platform/pico/rp2_common/hardware_resets/include \
|
|
external/platform/pico/rp2_common/hardware_sync/include \
|
|
external/platform/pico/rp2_common/hardware_timer/include \
|
|
external/platform/pico/rp2_common/hardware_uart/include \
|
|
external/platform/pico/rp2_common/hardware_watchdog/include \
|
|
external/platform/pico/rp2_common/hardware_xosc/include
|
|
|
|
# use a two segment memory layout, where all of the read-only sections
|
|
# of the binary reside in rom, and the read/write are in memory. The
|
|
# ROMBASE, MEMBASE, and MEMSIZE make variables are required to be set
|
|
# for the linker script to be generated properly.
|
|
#
|
|
LINKER_SCRIPT += \
|
|
$(BUILDDIR)/system-twosegment.ld
|
|
|
|
MODULE_DEPS += \
|
|
arch/arm/arm-m/systick \
|
|
lib/cbuf
|
|
|
|
# take the result of the build and generate a uf2 file
|
|
UF2BIN := $(basename $(OUTBIN)).uf2
|
|
UF2CONV_TOOL := $(LOCAL_DIR)/tools/uf2conv.py
|
|
FAMILY_ID := 0xe48bff56 # UF2 family id
|
|
$(UF2BIN): $(OUTBIN) $(UF2CONV_TOOL)
|
|
@$(MKDIR)
|
|
$(NOECHO)echo generating $@; \
|
|
$(UF2CONV_TOOL) -b $(ROMBASE) -f $(FAMILY_ID) -c -o $@ $<
|
|
|
|
EXTRA_BUILDDEPS += $(UF2BIN)
|
|
GENERATED += $(UF2BIN)
|
|
|
|
include make/module.mk
|