Not exactly what we want but avoids the lapic code needing the per cpu
structures which aren't set up without SMP support.
Consider leaving the percpu structure in, just only support for cpu 0.
This fixes trying to boot the X86_LEGACY build on a machine with a local
apic.
Doesn't do much but provided the detection path for it and ability to
hold initialized state. The higher level platform code is going to need
to use it directly so will mostly just provide an api for access to it.
Moved ACPI sniffing back to just after the VM is initialized instead of
all the way into platform_init(). This should try to ensure that all
drivers that come up afterwards will have ioapics discovered in case
future development tries to enable and use them, kicking the machine out
of virtual-wire-mode.
I have a bulldozer machine here that curiously starts the APIC IDs for
the cpus at 16 and counts up.
This is a problem since the current code assumes that the boot cpu is 0,
and would try to start itself (apic id 16) later because it thought it
was the first secondary. Fix this by re-reading the APIC id on the boot
cpu and patching the percpu structure a bit into boot. Kinda a hack but
avoids having to detect the APIC, find the type of ID to read, etc.
Also means that practically speaking the system is using the full 32bit
APIC IDs if that feature is present, since now the local apic id is
entirely read from the local apic as it should be (if present).
Fixes#475
- Skip cpus in the MADT table that are not enabled
- Bump count to 16 cpus
- Move the spurious interrupt vector to 0xff since it needs to end in
0xf on <=P6.
- Fix an assert in local apic code when not using x2apic and starting
secondaries.
- Follow the spec a bit closer and wait up till a second for each
secondary core to start.
-Move the local apic driver to arch/x86
-Add routines to send IPIs between cpus
Something is unstable at the moment and the system crashes after a while
with random corruptions when using SMP.
Extend the PIT driver to allow for one shot timers even though it
monotonically runs a 1kHz tick. This allows it to keep time and provide
one shot events, though only at 1ms resolution.
Rearrange some of the cpu initialization code to be runnable on each cpu
as they come up. Complete the 64bit bootstrap mechanism and call into C
code.
Makes it as far as trying to reschedule via an IPI. Need to implement
local apic based IPI mechanism.
Move common logic into a default routine in platform/power that other
platforms can reuse to implement the general default shutdown logic.
Add helper routines to print the cause.
Refactor the platforms that had substantial halt logic to reuse the
default implementation.
Use the legacy version of the memory sizing info that just hands the
kernel 2 implicit ranges: 0 ... X and 1MB ... Y.
Not ideal, but when booting on very old machines without BIOS e820 call
implemented it's all you got.
Move the mmu_initial_mapping from platform into arch/x86. For this
architecture the default mappings are basically hard coded in arch/x86
anyway, so move ownership of this data there, closer to where it's
actually initialized.
Update the 32 and 64bit paging code to properly use the paddr_to_kvaddr
and vice versa routines.
Update to allocate page tables directly from the pmm instead of the heap
(on 32bit code).
The old method assumed that all of the tables were mapped within the
kmap area of the kernel. This basically works on 64bit machines but on a
32bit x86 its entirely likely the ACPI tables are at higher physical
addresses that can be reached, which is currently limited to 1GB.
By using the VM it means it can individually map the headers and each
individual table.
Parse up to 16 pmm arenas from the multiboot memory data structure. Roll
the 32bit code to properly trim at 1GB as before, but using new logic.
Remove conditional checks on WITH_KERNEL_VM in x86 code, which only
really compiles with the mmu and the vm on.
In the case of platforms where a bios or firmware has not already
assigned all the resources, do so. Requires the platform supply one or
more ranges of physical address space and IO that can be mapped into
BARs.
Handles iterating through bridges, computing the sizes of all the
peripherals downstream and rolling that up as well.
Wire them up on arm and riscv which need them. x86-pc does not, so dont
call it.
Also fix a few miscellaneous bugs, notably PCI not detecting 64bit bars
properly due to an off by one bit error.
-Add a bus manager level, which is an object oriented walk of the pci
busses to build a per device object for later manipulation.
-Add features to enable MSI interrupts.
-Extend generic interrupt api to allow the platform to allocate vectors
for MSI interrupts.
-Rearrange a bit of the pc platform for the platform api changes.
-Add PC platform support for using the local apic to EOI MSI vectors.
-Fix up a few existing PCI drivers for small API changes.
-Add a few stubbed out routines for non PC platforms that use PCI.
Almost nothing changes here except moving braces to the same line as the
function declaration. Everything else is largely whitespace changes and
a few dangling files with tab indents.
See scripts/codestyle
-Add support for x86 legacy mode, designed for 386+ instead of pentium+
-Fixup uart driver to support com2
-Stub out PCI driver properly
-Fixup IDE driver to detect legacy disks
Most of the warnings are new, such as needing to mark fallthroughs on
cases explicitly. A few are based on signed vs unsigned comparisons.
Disable one warning that was annoying about comparing null to arguments
marked nonnull.
